Quick 220 Voltage Converting Power Supply

Power 220 / 240 Volt Equipment from
Ordinary 110 / 120 Volt Outlets

1. Plug the Quick 220 voltage converter into 110 / 120v outlets.
2. Connect 220 / 240v equipment to the Quick 220 outlets.
3. Begin use. 

International 220 / 240v equipment is easily connected with available plug adapters.  Access to 220 / 240 volt wiring is made easy, fast and safe without the heat and weight of a step-up transformer.

Applications include technical equipment, computer servers, power tools, international appliances, air conditioners, air compressors, and exercise equipment.

• 15 and 20 Ampere (Amp) capacities, continuous duty, plus momentary over range for starting motors and similar demands.
• To 4400 watts, continuous.
• Light weight:  Less than 3 pounds
• Small:  6.5 inches x 5 inches x 3 inches
• Portable, easy to use
• Silent
• Outlets for US/Canadian 220/240 volt straight blade and locking plugs
• Adapters fit 220 volt plugs from Europe, Asia, South America, Africa, Australia

Plug the Quick 220 power Supply into two independent 110/120 volt outlets without ground fault interrupters in the circuits.  Connect your 220/240 volt equipment.  Begin.

Safety

• Meets UL Standard 1012
• Tested and Listed by Intertek, a laboratory approved by OSHA to test products for workplace safety.
• Patented safety circuit checks and automatically locks out power circuits until connections and voltages are correct. 
• Interlock immediately and simultaneously electrically disconnects all input and output power lines if one of the 110/120 volt cords becomes disconnected or looses power.

Specifications for Quick 220 Power Supply - Version 2 (all models)

INPUT:  108 to 125 Volts AC, 60 HZ, non-GFI circuits, two circuits, out of phase
     Model A220-15:  Two 72 inch power cords, 15 amperes each line, NEMA 5-15 plugs
     Model A220-20:  Two 72 inch power cords, 20 amperes each line, NEMA 5-20 plugs

OUTPUT VOLTAGE:  Single Phase Input: 216 to 250 Volts AC (2 times input voltage)
      Three Phase Input: 187 to 216 Volts AC (1.732 times input voltage)

OUTPUT AMPERAGE: 
     Model A220-15D:  15A max. at 80% on, 20% off (time), 3 hr. max. cycle;  12A max. continuous
     Models A220-20 (all):  20A max. at 80% on, 20% off (time), 3 hr. max. cycle; 16A max. continuous

OUTPUT POWER:    Model A220-15:  3450 watts continuous, 16,500 watts peak, typical at 230 volts.
      Model A220-20 (all):  4600 watts continuous; 22,000 watts peak, typical at 230 volts.
    
OUTPUT RECEPTACLE: Model A220-15D - straight blade, duplex, NEMA 6-15R
      Model A220-20D - straight blade, duplex, NEMA 6-20R
      Model A220-20L - locking, single, NEMA L6-20R

POWER CONSUMPTION:   8 watts, plus equipment connected
SIZE:   Approximately 6-1/2 inches x 5 inches x 3 inches
WEIGHT: A220-15D - 3.1 pounds; A220-20D(all) - 3.8 pounds
ENVIRONMENT: 35 to 95 degrees F, 85% relative humidity, max., non-condensing.
      No explosive gases, dust or other materials. Dry.  Keep from water, oils or other liquids.
      Avoid excessive dust.
LIMITED WARRANTY:  One year, see warranty page for full text.

U.S. Patent Number 5,977,658

Assembled in USA

Specifications may change due to product and material improvements.