Test Equipment
Digital Voltage Meter

    Digital Voltage Meter

    Part No: TEST002

    Price Ea: $29.00


    Digital Voltmeter
    Two alkaline batteries, AAA (LR03)

    Measure wall outlet voltages using one hand.

    1. • For close measurements, clip the secondary probe to the meter body.
    2. • For measurements between points up to 42 inches apart, unclip the secondary probe from the meter.
    3. • For sockets having recessed, hard to reach contacts, remove the black probe covers, exposing slim 5/8" long probe tips.
    4. • Where bare probe tips risk a short, slip on probe covers, reducing exposed tips to 1/8 inch.

    Intertek Listed

    Digital readout - 7 to 690 volts, AC/DC

    Continuity check

    Phase rotation (three phase electrical systems)

    Light weight - Less than 7 ounces

    Water and dust resistant

    Range: 7-690 volts, AC/ DC

    Automatic detection of AC or DC with indication of DC polarity

    Accuracy: 3% or 5V at 23 degrees C

    Response Time: 90% of reading within 2 seconds

    Continuity Test: 0 to 1 Mohm, light and buzzer indicators

    Phase Rotation: Three phase, 4 wire system, 50/60 Hz

    Batteries: Two AAA alkaline (also known as LR03)

    Intertek Listed

    Safety: ETL listed

    1. US: Conforms to UL Std. 61010-1-05 & 61010-031-07
    2. Canada: Certified to CAN/CSA Std. C22.2 No. 61010-1 & 61010-031-07


    1. Operational: 14 to 130°F, -10 to 55°C
    2. Storage: -4 to 140°F, -20 to 60°C

    Humidity: To 85%, no condensation

    Dust and water resistant - standard IP64

    Weight: 6.8 ounces

    Length: 10 inches