Digital Voltage Meter

Measure wall outlet voltages using one hand.

1. • For close measurements, clip the secondary probe to the meter body.
2. • For measurements between points up to 42 inches apart, unclip the secondary probe from the meter.
3. • For sockets having recessed, hard to reach contacts, remove the black probe covers, exposing slim 5/8" long probe tips.
4. • Where bare probe tips risk a short, slip on probe covers, reducing exposed tips to 1/8 inch.

Digital readout - 7 to 690 volts, AC/DC

Continuity check

Phase rotation (three phase electrical systems)

Light weight - Less than 7 ounces

Water and dust resistant

Range: 7-690 volts, AC/ DC

Automatic detection of AC or DC with indication of DC polarity

Accuracy: 3% or 5V at 23 degrees C

Response Time: 90% of reading within 2 seconds

Continuity Test: 0 to 1 Mohm, light and buzzer indicators

Phase Rotation: Three phase, 4 wire system, 50/60 Hz

Batteries: Two AAA alkaline (also known as LR03)

Safety: ETL listed

1. US: Conforms to UL Std. 61010-1-05 & 61010-031-07
2. Canada: Certified to CAN/CSA Std. C22.2 No. 61010-1 & 61010-031-07

Temperature:

1. Operational: 14 to 130°F, -10 to 55°C
2. Storage: -4 to 140°F, -20 to 60°C

Humidity: To 85%, no condensation

Dust and water resistant - standard IP64

Weight: 6.8 ounces

Length: 10 inches

Click to View Instructions in PDF format