There are very few home owners who will be thinking of changing the wiring in their homes. This is due to the fact that reasons for tinkering with electrical wiring systems in the house are very rare, and when it does happen that some electrical wiring work is required, most home owners usually seek the services of an electrician who knows what they are doing.
It usually becomes necessary to change the wiring in the home from 110 volts to 220 volts when you suddenly have new electrical appliances that will need more power in order to function properly. For instance, if you have a dryer that works on a gas model, the 110 volts circuit will be more than adequate to meet and sustain the power needs of the gas dryer. However, if you opt for the more modern electrical dryer, then you will definitely need more power to make sure that your dryer is working at optimal capacity. So is there a 110 to 220 voltage converter on the market?
If you are interested in converting your 110 volts system to the 220 volts, then you will need a step up heavy transformer or a 110 to 220 voltage converter. In some cases, some of the devices that you want to work with when at home will require more than a simple step up transformer or a simple voltage converter. Being aware of exactly what is needed at home is one of the first steps that you should take before knowing how to convert from 110 volts to 220 volts.
The first thing to remember is that safety should be your first priority when working with electricity. Make sure that no one else who is not required for the conversion is around the working area. Wearing protective gear will also come in handy, for it will reduce the likelihood of getting hurt as a result of any freak accident involving electricity and the wiring.
The next step will involve switching off the main power at the main circuit, and adding commercial markers that will warn everyone from tampering with the circuit when you are working with the wiring. There are commercial tagging out devices that can do the job of warning everyone else from touching the circuit as you are working on the wiring pretty well.
After determining the carrying capacity of the cable that was supposed to supply voltage, you should endeavor to find a cable with a ground wire that you can use during the voltage conversion. This is a crucial step, and it would not be recommended to use a voltage converter without having such a cable nearby.
The installation of the wiring system so that you can convert 110 volts to 220 volts is not as hard as it might seem. All you have to do is to follow the instructions that have been clearly set out by the manufacturing company. After observing the numerous safety warnings that have been plastered all over the step up voltage converter, you will then have to test the circuit and make sure that it is still functional. You will also have the opportunity to troubleshoot any problems that may arise during the installation.